MDM-3

MDM 3 | 2K Meter Mix and Dispense Machine

Dosing system for processing small quantities of liquid, two-component synthetic resins

Compact system for efficient processing of liquid synthetic resins made of polyurethane resin or epoxy resin with an output up to 0.7 l/min at MV 100:100 (depending on viscosity, mixing ratio and hose lengths).

 

Technical data

Applications

Silicone machining

Prototype component  fabrication

Electric-grouting/Potting

Adhesive machining

Laboratory use

Metering pump drive

electrical actuator with steadier rotation speed

Mixing ratio

depends on pump combination 

Output

0,7 ltr/min at MV 100:100 

Control

on/off switch

Tank

Container connector for original Gebinde, orContainer 0,5 l / 0,75 l and 2 l (plastics),
3 l, 5 l, 10 l, 30 l or 60 l in VA possible

Compressed air

Standard equipment without compressed air

Power supply

220 Volt, 50 Hz
Special voltage on request!

Hose length

1,5 m, 3 m, 5 m

Mixing head

Static mixture

Additional equipment

Spray equipment

MDM 5

MDM 5
mdm-5_DE-EN.pdf
Adobe Acrobat document [522.4 KB]

MDM 5 | 2K Meter Mix and Dispense Machine

Dosing system for processing small quantities of liquid, two-component synthetic resins

Compact system for efficient processing of liquid synthetic resins made of polyurethane resin or epoxy resin with an output up to 1.5 l/min at MV 100:100 (depending on viscosity, mixing ratio and hose lengths).

 

 

Technical data

  

Applications

Prototype component fabrication
Electric-grouting
Silicone machining
Laboratory use

Metering pump drive

Frequency controlled motor or air motor

Mixing ratio

100: 10 up to 10: 100
depends on pump combinations

Output

Max. 1.5 kg/min. at mixing ratio 100 : 100

Control

With shotsize-timer
potlife-timer, output-regulating
by potentiometer

Tank

0.5 l / 0.75 l and 2 l (plastics), 3 l, 5 l
and special version 10 l, 30 l, 60 l, 100 l
in stainless steel possible

Tank heating

available

Compressed air

Standard 400 l / min, 6 – 8 bar
Spraying ca. 1000 l / min, 6 – 8 bar

Power supply

220 Volt, 50 Hz

Hose length

1,5 m, 3 m, 5 m

Mixing head

LC 5 / 2, LC 5 / 3, LC 5 / 3 M, LC 5 / 4,
LC 5 / 4 R

Additional equipment

Tank heating, heated hoses,
continuously variable adjustment
mechanism for A-components,
spray intention

MDM 6

MDM 6 | 2K Meter Mix and Dispense Machine

Dosing system for processing small quantities of liquid, two-component synthetic resins

Compact system for efficient processing of liquid synthetic resins made of polyurethane resin or epoxy resin with an output up to 3.5 l/min at MV 100:100 (depending on viscosity, mixing ratio and hose lengths).

 

 

MDM 6
mdm-6_DE-EN.pdf
Adobe Acrobat document [516.9 KB]

Technical data

Applications

Prototyp component fabrication
Electric-grouting
Adhesive machining
Laboratory use
Spray uses

Metering pump drive

Frequency controlled electric motor

Mixing ratio

100: 10 up to 10: 100
depends on pump combinations.
Adjustment by stepless gear box
by display for B-pump

Output

Up to 3.5 kg/min at mixing ratio 100 : 100

Control

Shot size timer, potlife-timer,
big or small circulation of the components,
flow rate adjustment
over potentiometer

Tank

3 l, 5 l, 10 l, 30 l, 60 l or 100 l in stainless steel

Tank heating

Possible

Compressed air

Standard 400 l / min, 6 – 8 bar
Spreaying ca. 1000 l / min, 6 – 8 bar

Power supply

380 / 415 Volt, 50 Hz

Hose length

1,5 m, 3 m, 5 m; heating possible

Mixing head

LC 5 / 2, LC 5 / 3 , LC 5 / 3 M, LC 5 / 4,
LC 5 / 4 R, LC 6 / 2 or LC 6 / 3

Additional equipment

Continuously variable adjustment
mechanism for A-components, spray
intention, automatic refill of the 30 l, 60 l
or 100 l material container

Print Print | Sitemap
© Metering Technology Services Ltd

Call

E-mail